|
<
back to Materials Index
Rubber and polymer products can be affected by many
variables including but not limited to temperature,
humidity, sunlight, oils, solvents, acids and pests
such as rodents and insects.
It is recommended that the storage area for the
product to be relatively cool, dark and dry environment
free of pests. Ideally, this would be between 50
and 70 Fahrenheit (10 and 21 Celsius) and away from
sources of heat. Also, it is recommended that the
product be stored away from any sources of ozone
as this adversely affects most rubbers and polymers.
If it is possible, it is encouraged to leave the
product in its original shipping container as this
will provide adequate protection in most instances.
Please consider the environment before printing.
|
